From: Michael Snyder (msnyder@revolutioncomputer.com)
Date: Fri Feb 14 2003 - 09:50:06 GMT-3
I'm using frame-relay from the telco, how could I use ppp encapsulation?
Are you referring to RFC 1973 ppp over frame-relay?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Colin Barber
Sent: Friday, February 14, 2003 2:52 AM
To: ccielab@groupstudy.com
Subject: RE: Binding Frame-Relay T1's
You could also use ppp encapsulation and then use multilink ppp
-----Original Message-----
From: Todd Veillette [mailto:tveillette@myeastern.com]
Sent: 14 February 2003 03:39
To: Michael Snyder
Cc: ccielab@groupstudy.com
Subject: Re: Binding Frame-Relay T1's
Per packet or per destination on the router, but to really bind into one
without
routing lots of scaleability a de-mux with a hssi into the router works
nicely.
-TV
----- Original Message -----
From: "Michael Snyder" <msnyder@revolutioncomputer.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, February 13, 2003 8:12 PM
Subject: Binding Frame-Relay T1's
> Simple question, I think I know the answer but I wanted to double
check.
>
> Whats my options in binding two frame-relay T1s into a fat pipe?
>
> I know I can do per destination load sharing; do I have any other
> options?
>
>
>
> Michael Snyder
> Lead Network Engineer
> CCNP/DP, CSS1, MCSE NT/2000
> Revolution Computer Systems
> (270) 443-7400
>
>
> .
------------------------------------------------------------------------
------
Live Life in Broadband
www.telewest.co.uk
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material.
Statements and opinions expressed in this e-mail may not represent those
of the company. Any review, retransmission, dissemination or other use
of, or taking of any action in reliance upon, this information by
persons or entities other than the intended recipient is prohibited. If
you received this in error, please contact the sender immediately and
delete the material from any computer.
========================================================================
======
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:22 GMT-3