From: Danny Andaluz andaluz (dannyandaluz@comcast.net)
Date: Thu Feb 13 2003 - 17:20:09 GMT-3
I did't get any kind of error. The router just reloaded itself right
away. It looks as if it ignored the 1 after reload. It reloaded with
no errors. This is the show version after the reload:
sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-INS-L), Version 12.0(25), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 31-Dec-02 12:55 by srani
Image text-base: 0x0304142C, data-base: 0x00001000
ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a),
RELEASE
SOFTW
ARE (fc1)
r8 uptime is 1 minute
System restarted by reload
System image file is "flash:/c2500-ins-l.120-25.bin"
cisco 2500 (68030) processor (revision A) with 4096K/2048K bytes of
memory.
Processor board ID 01065031, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
Cisco-ET Extended Temperature platform.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
Looks good to me.
Danny
CCNP # 1,234,649
>
>
> >From: Chuck Church <ccie8776@rochester.rr.com>
> >Reply-To: Chuck Church <ccie8776@rochester.rr.com>
> >To: Emad <emad@zakq8.com>, ccielab@groupstudy.com
> >Subject: Re: router reload - undocumented
> >Date: Thu, 13 Feb 2003 09:30:16 -0500
> >
> >I noticed the same thing. Yesterday during that 'reload in'
> thread,
> >someone
> >mentioned that you could do 'reload x', where x is the number of
> minutes.>It's not in the docs or CLI help, but it accepted it.
> Asked if I wanted to
> >save, and then proceed. But it reloaded immediately. Didn't recover
> >either. It was a 2611. I was getting 'bad magic file number' or
> something>like that. Figured my flash was going bad, so I TFTPed,
> and re-flashed it.
> >But you had a similar problem. Almost seems like an undocumented
> command>that sets a flag in the config register or the cookie or
> something?
> >Anybody
> >have an idea?
> >
> >Thanks,
> >
> >Chuck Church
> >CCIE #8776, MCNE, MCSE
> >
> >
> >----- Original Message -----
> >From: "Emad" <emad@zakq8.com>
> >To: <ccielab@groupstudy.com>
> >Sent: Thursday, February 13, 2003 7:29 AM
> >Subject: router reload
> >
> >
> > > While I was working on a router I made a mistake by typing
> reload 1 ,
> >then
> > > the router reloaded but stopped before even decompressing the
> IOS image
> > >
> > > Does anyone know why?
> > > .
> >.
> _________________________________________________________________
> MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.
> http://join.msn.com/?page=features/virus
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:21 GMT-3