From: Peter van Oene (pvo@usermail.com)
Date: Thu Feb 13 2003 - 13:25:41 GMT-3
Should show up as one route with two next-hops. Have you verified the
costs are equal?
At 11:24 AM 2/13/2003 -0500, Sanfilippo, Ted wrote:
>Will it show up in the routing table with two separate routes? I couldn't
>get this to work.
>
>-----Original Message-----
>From: Peter van Oene [<mailto:pvo@usermail.com>mailto:pvo@usermail.com]
>Sent: Wednesday, February 12, 2003 4:48 PM
>To: ccielab@groupstudy.com
>Subject: Re: OSPF Load Balancing
>
>At 03:44 PM 2/12/2003 -0500, Sanfilippo, Ted wrote:
> >Does anyone know how to load balance over OSPF circuits?
> >
> >If I have the following design:
> >
> > R1
> > / \
> > / \
> > R2 -----R3
> >
> >And the network 1.1.1.0 is on the link between R2 and R3, how can I have R1
> >send packets via both R2 and R3? Is this Possible?
>
>So long as the metrics are equal, R1 will load balance. If they are
>unequal, you could modify them to be equal.
>
>
>
> >Ted Sanfilippo
> >.
>.
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:21 GMT-3