Re: ospf issue >> no routes in routing table

From: Herve Bruyere (hbruyere@cisco.com)
Date: Thu Feb 13 2003 - 06:42:36 GMT-3

• Next message: Nagarajan M: "Re: Lab equipment list."
• Previous message: David Terry (ETL): "IPX and Token ring on the lab"
• Maybe in reply to: Krucker, Louis: "ospf issue >> no routes in routing table"
• Next in thread: Emad: "RE: ospf issue >> no routes in routing table"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

More info would be needed, but from the book "troubleshooting ip routing protocols",
it could be:

- network type mismatch
- subnet/mask mismatch
- one side is numbered and the other is unnumbered
- distribute-list
- a broken PVC in a full mesh frame-relay with broadcast network type

regards,
Herve

Krucker, Louis wrote:
> Does anybody know this issue?
>
> OSPF is up in full state on all spokes sites, the database contains some
> entries but
> there are not placed in the routing table. I do not use authentication and
> the network type
> is nbma on all interfaces. IOS is 12.1(5) T9
> Any comments are welcome..
> cheers
> Louis
> .
.

• Next message: Nagarajan M: "Re: Lab equipment list."
• Previous message: David Terry (ETL): "IPX and Token ring on the lab"
• Maybe in reply to: Krucker, Louis: "ospf issue >> no routes in routing table"
• Next in thread: Emad: "RE: ospf issue >> no routes in routing table"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:21 GMT-3