From: Todd A. Kaczorowski (tkaczoro@cisco.com)
Date: Thu Feb 13 2003 - 02:06:29 GMT-3
6.2 introduces a feature known as LAN Failover where a dedicated ethernet
interface can be used to implement non-stateful failover. You no longer are
required to use the 3 meter serial like cable.
Stateful Failover, as always, requires the use of an additional dedicated
interface for passing state info. This interface should be equal to the
fastest interface in the box.
tk
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Hansraj Patil
Sent: Wednesday, February 12, 2003 11:31 PM
To: 'Wasson, Robert'; 'Trevor Angus'; security@groupstudy.com
Cc: ccielab@groupstudy.com
Subject: RE: Pix IOS 6.2 failover
Does that mean Failover cable is needed no matter what type of failover
you do ?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Wasson, Robert
Sent: Wednesday, February 12, 2003 3:20 PM
To: 'Trevor Angus'; security@groupstudy.com
Cc: ccielab@groupstudy.com
Subject: RE: Pix IOS 6.2 failover
If you are referring to State full Failover than Yes. But the 3rd interface
is used in addition to the Failover cable.
Rob
Robert Wasson
Sr. Network Engineer
Children's Hospital and Health Center
3020 Children's Way | San Diego, CA | 92123-4282
858-966-7408 | 858-571-0293 (fax) | rwasson@chsd.org
-----Original Message-----
From: Trevor Angus [mailto:trevor.angus@t-systems.co.za]
Sent: Wednesday, February 12, 2003 10:55 AM
To: security@groupstudy.com
Cc: ccielab@groupstudy.com
Subject: Pix IOS 6.2 failover
Has anyone used the failover feature of PIX IOS 6.2 where the 3rd interface
is used instead of the failover serial cable?
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:20 GMT-3