From: MADMAN (dave@interprise.com)
Date: Wed Feb 12 2003 - 18:26:45 GMT-3
OSPF isn't doing the load balancing but it will populate the routing
table. If the destination network is of an equal cost over both links
you will have two equal cost paths. From there is is the switching
mechanism that is relevant.
Dave
Sanfilippo, Ted wrote:
> Does anyone know how to load balance over OSPF circuits?
>
> If I have the following design:
>
> R1
> / \
> / \
> R2 -----R3
>
> And the network 1.1.1.0 is on the link between R2 and R3, how can I have R1
> send packets via both R2 and R3? Is this Possible?
>
>
> Ted Sanfilippo
> .
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"You don't make the poor richer by making the rich poorer." --Winston Churchill .
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:20 GMT-3