From: alee@cccis.com
Date: Wed Feb 12 2003 - 17:56:39 GMT-3
Hi there,
I have one 6509 switch with MSFC and Gig module, and 4 VLAN configured on
MSFC. One Gig port connected to 2948G-L3 switch. Below is my config on
the Gig port of 2948G-L3. I am only able to ping IP address on the same
VLAN, but not different VLANs. Below is my config of MSFC and 2948G-L3.
Need to get this going ASAP. Any help will be appreciated.
GL2948-1#
interface GigabitEthernet49.1
encapsulation dot1Q 1 native
ip address 172.20.38.8 255.255.255.0
no ip redirects
no ip directed-broadcast
!
interface GigabitEthernet50
no ip address
no ip directed-broadcast
!
ip default-gateway 172.20.38.2
ip classless
MSFC6509#
mls rp ip
mls rp ipx
!
!
!
interface Vlan1
mac-address 0012.3456.7891
ip address 172.20.38.2 255.255.255.0
mls rp ip
mls rp ipx
!
interface Vlan2
mac-address 0012.3456.7891
ip address 172.20.9.2 255.255.255.0
mls rp ip
mls rp ipx
!
interface Vlan3
mac-address 0012.3456.7891
ip address 172.20.8.2 255.255.255.0
mls rp ip
mls rp ipx
!
interface Vlan4
mac-address 0012.3456.7891
ip address 172.20.39.2 255.255.255.0
mls rp ip
mls rp ipx
!
router rip
network 172.20.0.0
!
ip default-gateway 172.20.8.1 ----->3640 router
GL6509> (enable)
#module 3 : 8-port 1000BaseX Ethernet
set module name 3
set port disable 3/5-8
set trunk 3/1 on dot1q 1-1005,1025-4094 ----> connected to 2948G-L3
set trunk 3/2 on dot1q 1-1005,1025-4094
set trunk 3/3 on dot1q 1-1005,1025-4094
set trunk 3/4 on dot1q 1-1005,1025-4094
Arthur Lee
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:20 GMT-3