From: Wright, Jeremy (wright@admworld.com)
Date: Wed Feb 12 2003 - 00:43:31 GMT-3
have 2 hosts irdp routers..i wanted my "frs" client to be the client. i cant
find a good example of irdp. i saw the irdp thread earlier this week and
simulating basically the same thing but I am getting an error. i dont think
im routing anything unless its thinking locally. do i need to turn off ip
routing?..:
frs(config)#ip gdp irdp
%Cannot start GDP client; system is routing IP
frs(config)#^Z
frs#sh ip route
14:28:36: %SYS-5-CONFIG_I: Configured from console by console
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is not set
172.16.0.0/24 is subnetted, 1 subnets
C 172.16.255.0 is directly connected, Ethernet0
11.0.0.0/24 is subnetted, 1 subnets
C 11.11.11.0 is directly connected, Loopback0
frs#
CONFIDENTIALITY NOTICE:
This message is intended for the use of the individual or entity to
which it is addressed and may contain information that is privileged,
confidential and exempt from disclosure under applicable law. If the reader
of this message is not the intended recipient or the employee or agent
responsible for delivering this message to the intended recipient, you are
hereby notified that any dissemination, distribution or copying of this
communication is strictly prohibited.
If you have received this communication in error, please notify us
immediately by email reply or by telephone and immediately delete this
message and any attachments. In the U.S. call us toll free at (800)
637-5843.
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:19 GMT-3