Pix static problem

From: george gittins (g.gittins@edinburg.esc1.net)
Date: Tue Feb 11 2003 - 14:29:33 GMT-3

• Next message: Pratt, Jeremy: "OT, wireless app issue"
• Previous message: Joe Chang: "Re: RSVP"
• Next in thread: scook@forsythemca.com: "Re: Pix static problem"
• Maybe reply: scook@forsythemca.com: "Re: Pix static problem"
• Maybe reply: george gittins: "FW: Pix static problem"
• Maybe reply: balaji.balakrishnan: "Re: Pix static problem"
• Maybe reply: george gittins: "FW: Pix static problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I have a problem with my pix , I have two dns servers with internal ip that
I set up static mappings. However the webserver on the dmz zone I can only
hit it via ip, so im assuming that the internal dns mappings is not working
when I do a show conduit statement I show no hits for my internal dns.

The ip of my internal dns servers are

10.16.1.249 & 250

and on the outside

204.158.241.249

204.158.241.250

I place these statements

Static (inside, outside) 204.158.241.250 10.16.1.249 netmask 255.255.255.255

Same for the other.

And a conduit statement

Conduit permit 204.158.241.249 eq 53 any

And no luck

Any suggestions

George Gittins

Network and Computer Maintenance Supervisor
.

• Next message: Pratt, Jeremy: "OT, wireless app issue"
• Previous message: Joe Chang: "Re: RSVP"
• Next in thread: scook@forsythemca.com: "Re: Pix static problem"
• Maybe reply: scook@forsythemca.com: "Re: Pix static problem"
• Maybe reply: george gittins: "FW: Pix static problem"
• Maybe reply: balaji.balakrishnan: "Re: Pix static problem"
• Maybe reply: george gittins: "FW: Pix static problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:18 GMT-3