From: cebuano (cebu2ccie@cox.net)
Date: Sun Feb 09 2003 - 02:40:17 GMT-3
Hi Group.
The documentation on the command "isis circuit-type" says.
To configure the type of adjacency, use the isis circuit-type command in
interface configuration mode.
[snip]
Level 2 adjacencies are established if the other routers are Level 2 or
Level 1-2 routers and their interfaces are configured for Level 1-2 or
Level 2. Level 1 adjacencies will never be established over this
interface.
I thought that if the router process and interface are left at the
default settings, then you will have TWO adjacencies: Level 1 and Level
2.
Is there something I'm not reading correctly in the documentation's last
sentence?
Doyle p.605 says."Neighboring L1/L2 routers form BOTH an L1 adjacency
and an L2 adjacency.
TIA,
Elmer
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:17 GMT-3