From: Lillemor Hamnqvist (lillemor@hamnqvist.org)
Date: Sat Feb 08 2003 - 18:38:33 GMT-3
Fadil,
Timely question. I have just finished a T1/E1 project. The ds0-group
command is used when you have a T1/E1 voice connection, it creates
voice-ports. The channel-group command is used for a data connection and it
create serial interfaces.
http://www.cisco.com/en/US/tech/tk652/tk701/technologies_configuration_examp
le09186a00800afd65.shtml#intro
http://www.cisco.com/en/US/products/sw/iosswrel/ps1834/products_feature_guid
e09186a00800e9762.html#wp1021210
/lilli
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Fadil
Sent: Friday, February 07, 2003 3:57 AM
To: ccielab@groupstudy.com
Subject: t1/e1
Hi all,
Can somebody please tell me the difference between the commands ds0-group
and
channel-group ?
Also any kind of links about this (other than CCO) will be greatly
appreciated.
Best Regards
Fadil
.
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:17 GMT-3