From: Jonathan V Hays (jhays@jtan.com)
Date: Sat Feb 08 2003 - 16:25:23 GMT-3
Have you read this?
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/
ip_c/ipcprt1/1cdipadr.htm#1001945
And this?
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/
ip_r/iprprt1/1rdipadr.htm#1018753
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Casey, Paul (6822)
Sent: Saturday, February 08, 2003 12:59 PM
To: 'ccielab@groupstudy.com'
Subject: IRDP configuration information info requested.
Hello.
Does anyone have a sample config or document on how to use IRDP.
I was on the Cisco website and there is very little info on it as far as
I can see, regarding examples,
I cant quite understand it,
Can 2 routers back to back use it to learn routes from each other,
without a routing protocol, or is it just for PCs to learn there default
gateway. Is it something similar to On demand routing,..? I know there
only seems to be a few commands needed to configure it, but I wanted to
configure it in my lab to test it,
Can I test with 2 routers or do I need PC,
There was some other info on the Cisco website regarding it leaning
EIGRP/RIP info for default-gateway usage,
I am unclear as how to configure and test this,
And doc/link/info/ would be greatly appreciated.
I have looked on the web to no avail.
Kind regards.
Paul.
************************************************************************
****************
This E-mail is from O2. The E-mail and any files
transmitted with it are confidential and may also be privileged and
intended solely for the use of the individual or entity to whom they are
addressed. Any unauthorised direct or indirect dissemination,
distribution or copying of this message and any attachments is strictly
prohibited. If you have received the E-mail in error please notify
postmaster@O2.com or
telephone ++ 353 1 6095000.
************************************************************************
*****************
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:16 GMT-3