From: cannonr (cannonr@attbi.com)
Date: Sat Feb 08 2003 - 15:24:48 GMT-3
Actually, it is easier for the group to help if full configs are posted.
Make sure Pnni routing is enabled on the LS1010. You don't need to define
vc's on the ls1010. Make sure that the following is on your ATM intf's
pvc 1/5 qsaal (svc signaling)
pvc 2/16 ilmi (configure the pvc that ilmi uses)
Also, verify your nsap address. I usually do a show int atm to verify that
I am learning the nsap address and then cut and paste so I don't make
typo's. If all of that is correct, post the rest of your configs and
someone here can probably help.
----- Original Message -----
From: "Sage Vadi" <sagevadi@yahoo.co.uk>
To: <ccielab@groupstudy.com>
Sent: Friday, January 31, 2003 7:14 AM
Subject: ATM: RFC-1577 Classical IP and ARP over ATM
> Hi all,
>
> ~ARP Server (R1)~
> interface ATM3/0.1 multipoint
> ip address 155.100.5.1 255.255.255.0
> atm esi-address 111111111111.11
> atm arp-server self
>
> ~ARP Client (R2)~
> interface ATM3/0.1 multipoint
> ip address 155.100.5.2 255.255.255.0
> atm esi-address 222222222222.22
> atm arp-server nsap
> 47.00918100000000902B03E001.111111111111.11
>
> NB: for ease of reading I have removed ATM physical
> interface config - but they are all correct.
>
> Q) I cannot PING each other's interface. I cannot see
> the atm arp mapping (show atm arp) neither.
>
> The LS101/ATM switch is setup default vanilla - with
> ilmi enabled. According to configs on CCO, there
> doesn't seem to indicate that I need to configure SVCs
> on the LS1010.
>
> Help/hints/tips appreciated.
> Cheers,
> Sage
>
> __________________________________________________
> Do You Yahoo!?
> Everything you'll ever need on one web page
> from News and Sport to Email and Music Charts
> http://uk.my.yahoo.com
> .
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:16 GMT-3