From: William (wdoyle123@comcast.net)
Date: Sat Feb 08 2003 - 14:54:59 GMT-3
Precisely. It was left out intentionally since this is what I was trying to prove out after reading it on groupstudy
I have tried many variations and cannot seem to get this to be applied. I
> > read that this was used as the default in the event no username was found
> in
> > the database but when I do this I get an authentication failure.
----- Original Message -----
From: "Barry Rowland" <reachbarry@bigfoot.com>
To: "William" <wdoyle123@comcast.net>; <ccielab@groupstudy.com>
Sent: Saturday, February 08, 2003 11:04 AM
Subject: Re: PPP CHAP PASSWORD
> You can see in your debub that the username R2 is not found. Check R1's
> config for
> the global config command: username R2 pass 0 cisco.
>
>
> HTH
> ----- Original Message -----
> From: "William" <wdoyle123@comcast.net>
> To: <ccielab@groupstudy.com>
> Sent: Saturday, February 08, 2003 10:04 AM
> Subject: Re: PPP CHAP PASSWORD
>
>
> > Can anyone explain under what circumstances you would use this command?
> >
> > "PPP CHAP PASSWORD"
> >
> > I have tried many variations and cannot seem to get this to be applied. I
> > read that this was used as the default in the event no username was found
> in
> > the database but when I do this I get an authentication failure.
> >
> > Here is my config for what I described.
> >
> > Her is my config: R2 is calling R1
> >
> > R2
> >
> > username R1 password 0 cisco
> >
> > interface BRI1/0
> >
> > ip address 12.12.12.2 255.255.255.0
> >
> > encapsulation ppp
> >
> > dialer map ip 12.12.12.1 name R1 broadcast 2018662911
> >
> > dialer map ip 12.12.12.1 name R1 broadcast 2018662913
> >
> > dialer load-threshold 1 outbound
> >
> > dialer-group 1
> >
> > isdn switch-type basic-ni
> >
> > isdn spid1 20133015680101 3301568
> >
> > isdn spid2 20133015790101 3301579
> >
> > ppp authentication chap
> >
> > ppp multilink
> >
> > R1
> >
> > !
> >
> > interface BRI2/0
> >
> > ip address 12.12.12.1 255.255.255.0
> >
> > encapsulation ppp
> >
> > dialer map ip 12.12.12.2 name R2 broadcast 2013301568
> >
> > dialer map ip 12.12.12.2 name R2 broadcast 2013301579
> >
> > dialer load-threshold 1 outbound
> >
> > dialer-group 1
> >
> > isdn switch-type basic-ni
> >
> > isdn spid1 20186629110101 8662911
> >
> > isdn spid2 20186629130101 8662913
> >
> > ppp authentication chap
> >
> > ppp chap password 7 030752180500 (password cisco)
> >
> > ppp multilink
> >
> > Here is output:
> >
> > --More--
> >
> > 13:27:04: %LINK-3-UPDOWN: Interface BRI2/0:1, changed state to up
> >
> > --More--
> >
> > 13:27:04: BR2/0:1 PPP: Treating connection as a callin
> >
> > 13:27:05: BR2/0:1 CHAP: O CHALLENGE id 38 len 23 from "R1"
> >
> > 13:27:05: BR2/0:1 CHAP: I CHALLENGE id 38 len 23 from "R2"
> >
> > 13:27:05: BR2/0:1 CHAP: Waiting for peer to authenticate first
> >
> > 13:27:05: BR2/0:1 CHAP: I RESPONSE id 38 len 23 from "R2"
> >
> > 13:27:05: BR2/0:1 CHAP: Unable to validate Response. Username R2 not found
> >
> > 13:27:05: BR2/0:1 CHAP: O FAILURE id 38 len 26 msg is "Authentication
> > failure"
> >
> > --More--
> >
> > 13:27:05: %LINK-3-UPDOWN: Interface BRI2/0:1, changed state to down
> >
> > 13:27:06: %LINK-3-UPDOWN: Interface BRI2/0:1, changed state to up
> >
> > 13:27:06: BR2/0:1 PPP: Treating connection as a callin
> >
> > 13:27:07: BR2/0:1 CHAP: O CHALLENGE id 39 len 23 from "R1"
> >
> > 13:27:07: BR2/0:1 CHAP: I CHALLENGE id 39 len 23 from "R2"
> >
> > 13:27:07: BR2/0:1 CHAP: Waiting for peer to authenticate first
> >
> > 13:27:07: BR2/0:1 CHAP: I RESPONSE id 39 len 23 from "R2"
> >
> > 13:27:07: BR2/0:1 CHAP: Unable to validate Response. Username R2 not found
> >
> > 13:27:07: BR2/0:1 CHAP: O FAILURE id 39 len 26 msg is "Authentication
> > failure"
> > .
> .
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:16 GMT-3