From: Tim Devries (TDevries@cyence.com)
Date: Fri Feb 07 2003 - 15:33:44 GMT-3
Hello,
I have the following topology:
+------+ +------- +
| PIX | ------------------------- | PIX |
+-------+ (failover) +--------+
| |
| |
|(vlan100) |(vlan100)
| |
| |
| 1/2 | 1/2
+----------+ +----------+
| 6509A |------Trunk-------| 6509B |
+----------+ (vlan100) +----------+
2/15 | |
| |
|Vlan(100) |Vlan(100)
| |
Network Probe
I would like to set ports 1/2 on both 6509's to be the source and would like
to set
port 2/15 on 6509A to be the destination. Looking at :
http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration
_guide_chapter09186a008007f323.html#1019851
I cannot determine whether the existing trunk would need to permit my RSPAN
vlan (555) in addition to my data vlan(100), or whether it would be better
practice to create a seperate trunk to carry the RSPAN traffic. I am not
running VTP. Would someone be kind enough to fill me in on this?
Thanks,
Tim
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:15 GMT-3