From: Casey, Paul (6822) (Paul.Casey@o2.com)
Date: Thu Feb 06 2003 - 20:49:29 GMT-3
802.1q trunking Works for 10mb/s interfaces check out following link (watch
wordwrap)
Supported on some 2600/3600 series routes.
Dunno know if Cisco advertise this openly but here is the link on there web
site.
You need an account to view.
Enjoy.
Kind regards.
Paul.
http://www.cisco.com/en/US/customer/products/hw/routers/ps259/prod_bulletin0
9186a00800921e4.html
-----Original Message-----
From: Yinka Daramola [mailto:o_daramola@hotmail.com]
Sent: 06 February 2003 23:29
To: Amlendu Kumar
Cc: ccielab@groupstudy.com
Subject: Re: Trunk on 10mb
Thanks Amlendu. I'll check the documentation for a 2924.
ps: the question was to configure the type of encapsulation that would work
on a 10mb port, on a fastethernet port.
Yinka
----- Original Message -----
From: "Amlendu Kumar" <amlendu_kumar@hotmail.com>
To: "Yinka Daramola" <o_daramola@hotmail.com>
Sent: Thursday, February 06, 2003 3:30 PM
Subject: Re: Trunk on 10mb
> Hi Yinka
>
> No trunking works below 100 mb on 3550
> It works on 2924 xl with dot 1q at 10 mb
> I have tested this .
>
> Reagards Amlendu
>
> ----- Original Message -----
> From: "Yinka Daramola" <o_daramola@hotmail.com>
> To: <ccielab@groupstudy.com>
> Sent: Thursday, February 06, 2003 10:54 PM
> Subject: Trunk on 10mb
>
>
> > I'm going through one of iPexpert's 3550 lab and there is a
> > requirement
to
> > configure the only trunk protocol that works on a 10Mb interface.
> >
> > Is this 802.1Q ? I searched the archives and did not get a
> > conclusive
> answer.
> >
> > Does anyone know a specific link that answers the question? What
> > IOS
code
> > supports this?
> >
> > Thanks.
> >
> > Yinka Daramola, MCSE, CCNP, RHCE
> > Red Hat Inc.
> > .
****************************************************************************************
This E-mail is from O2. The E-mail and any files
transmitted with it are confidential and may also be privileged and intended
solely for the use of the individual or entity to whom they are addressed.
Any unauthorised direct or indirect dissemination, distribution or copying
of this message and any attachments is strictly prohibited. If you have
received the E-mail in error please notify postmaster@O2.com or
telephone ++ 353 1 6095000.
*****************************************************************************************
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:14 GMT-3