From: OhioHondo (ohiohondo@columbus.rr.com)
Date: Mon Feb 03 2003 - 10:45:46 GMT-3
Louis
Note -- the /32 route is needed in some instances. For example when using
OSPF network type multipoint in a frame relay network the /32 route enables
the spokes to reach one another.
-----Original Message-----
From: OhioHondo [mailto:ohiohondo@columbus.rr.com]
Sent: Monday, February 03, 2003 8:18 AM
To: Luis Miguel Gil; ccielab@groupstudy.com
Subject: RE: peer neighbor route
Luis
If you don't need the /32 route then it is best not to have it. Imagine a
network that had hundreds or thousands of these /32 routes in its' routing
table. It's best to have the roting tables as small as possible.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Luis Miguel Gil
Sent: Monday, February 03, 2003 7:48 AM
To: ccielab@groupstudy.com
Subject: peer neighbor route
Hi, future ccies,
I don't really understand the effect of the command "(no) peer neighbor
route" when establishing a dialup connection between two routers. With the
"no..." the routing does not install a connected route (/32) to the
neighbor, but it install a proper route (i.e. a /24) to the same network.
Without, wich is the default option, both (/32 and /24) appear in the
routing table. So what ? I mean, what is the impact of having this route
(/32) ? Everything works in the same way, I think...
Thanks in advance,
Luis Miguel.
.
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:01 GMT-3