RE: Cisco voice

From: Stuart Juggins (sjuggins@cisco.com)
Date: Mon Feb 03 2003 - 07:41:54 GMT-3

• Next message: Sage Vadi: "ISIS: Level1/2 Router Area - authentication"
• Previous message: Colin Barber: "RE: NTP"
• Maybe in reply to: love cisco: "Cisco voice"
• Next in thread: love cisco: "RE: Cisco voice"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

What you need to do is the following :-

Dialing Router :-

voice-port 2/0

dial-peer voice 1 pots
 destination-pattern 1111
 port 2/0

dial-peer voice 2 voip
 destination-pattern .... <--- Means any 4 digit number dialled
 session target ipv4:10.1.1.1 <--- What ever the called router is

Called Router :-

voice-port 2/0

dial-peer voice 1 pots
 destination-pattern .... <--- Will accept any 4 digit number dialled
 port 2/0

dial-peer voice 2 voip
 destination-pattern 1111
 session target ipv4:10.1.1.2

Hope this helps,
Stuart J.

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of love
cisco
Sent: 03 February 2003 06:14
To: ccielab@groupstudy.com
Subject: Cisco voice

A simple question for you.
How to config ANY PHONE NUMBER for cisco voice FXS port?

• Next message: Sage Vadi: "ISIS: Level1/2 Router Area - authentication"
• Previous message: Colin Barber: "RE: NTP"
• Maybe in reply to: love cisco: "Cisco voice"
• Next in thread: love cisco: "RE: Cisco voice"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:01 GMT-3