From: Tony H. (aamercado31@yahoo.com)
Date: Mon Feb 03 2003 - 05:25:31 GMT-3
HI
I am trying to do back to back btwn the following:
MC3800#A (2 Channelized T1/PRI port(s))
MC3800#B (1 Channelized T1/PRI port(s)) T1 (1 Port)
2600 with Multi-Flex Trunk WAN daughter card and IMA 4
port T1 Port adapter
I am following the CCO doc:
http://www.cisco.com/en/US/tech/tk713/tk584/technologies_configuration_example09186a00800a6b82.shtml
r5 (3810#A)
controller T1 0
framing esf
clock source internal
linecode b8zs
channel-group 1 timeslots 1 speed 64
interface Serial0:1
ip address 5.5.5.5 255.255.255.0
encapsulation ppp
r6 (3810#B)
controller T1 0
framing esf
linecode b8zs
channel-group 1 timeslots 1 speed 64
interface Serial0:1
ip address 5.5.5.6 255.255.255.0
encapsulation ppp
and check my cabling with:
http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a3f09.shtml
as T1 CSU/DSU
1-4
2-5
4-1
5-2
Can't ping..any insights or this is not possible? thx
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:01 GMT-3