From: Erick B. (erickbe@yahoo.com)
Date: Mon Feb 03 2003 - 02:11:16 GMT-3
Hunt,
Here's the URL to the cisco 3550 docs:
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12112cea/3550scg/index.htm
I haven't played with this stuff yet myself...
--- Hunt Lee <huntl@webcentral.com.au> wrote:
> Hi Erick,
>
> Can you please teach me how I can do the per-vlan
> QoS map??
>
> Thanks in advance,
>
> Best Regards,
> Hunt
>
> -----Original Message-----
> From: Erick B. [mailto:erickbe@yahoo.com]
> Sent: Monday, 3 February 2003 2:23 PM
> To: Hunt Lee; ccielab@groupstudy.com
> Subject: Re: 3550
>
> Hunt,
>
> I think this is done with QoS queuing / wrr
> configuration with possible use of the expedite
> queue.
> Couldn't find anything in document with this sample
> exactly but QoS seems like the only area where this
> could be achieved. Would have to do a per-vlan qos
> map
> to map certain values to each vlan so the traffic
> can
> be weighed.
>
> I'm not familiar with the lab scenario you're doing
> so
> might be barking up the wrong tree.
>
> --- Hunt Lee <ciscoforme3@yahoo.com.au> wrote:
> > Hello Group,
> >
> > I have a lab requirement which says:-
> >
> > Configure the 3550 so that if the backplane of the
> > switch gets overloaded, the ports
> > in VLAN 3 get serviced before the ports in VLAN 5.
> >
> > Anyone knows how to achieve this?
> >
> > Regards,
> > H.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:01 GMT-3