From: Ali Fahmi (afahmi@plasa.com)
Date: Sun Feb 02 2003 - 14:40:57 GMT-3
I'm not really sure my answer correct or not since there
is no docs about this ,
change default CoS for all incoming packets from 0
(default value) to higher value,
example:
mls qos cos 5
any comments?
On Sun, 2 Feb 2003 12:37:25 +1100 (EST)
Hunt Lee <ciscoforme3@yahoo.com.au> wrote:
>Hello Group,
>
>I have a lab requirement which says:-
>
>Configure the 3550 so that if the backplane of the switch
>gets overloaded, the ports
>in VLAN 3 get serviced before the ports in VLAN 5.
>
>Anyone knows how to achieve this?
>
>Regards,
>H.
>
>http://movies.yahoo.com.au - Yahoo! Movies
>- What's on at your local cinema?
>.
===========================================================================================
Meriahkan Tahun Baru Imlek dengan mengirimkan Kartu Elektronik PlasaCom kepada kerabat dan teman Anda
Kepada para pengguna TELKOMSave, lakukan pergantian kartu lama Anda segera ! http://www.telkomsave.com
===========================================================================================
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:01 GMT-3