From: Don (seadon@attbi.com)
Date: Sun Feb 02 2003 - 03:09:31 GMT-3
I found it extremely useful to use a highlighter to label the routing
protocol in use on each interface. I would mark each and every interface on
my drawing (including loopbacks) with things like r2 for rip2, a number for
the ospf area, e100 for eigrp (AS) 100, etc. Normally each interface must
be a member of one (and only one) interior protocol. This help keep me from
advertising an interface in the wrong protocol or in the wrong ospf area, as
well as helping me make sure every interface was included in a protocol.
Since the exterior routing protocols usually overlap the interior protocols,
I used a different color highlighter for the exterior information. I also
tended to draw circles around each area or AS. It helped me pass
Don
----- Original Message -----
From: "Bill Cooley" <wcooley@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, February 01, 2003 10:52 AM
Subject: Use of Highlighters
> Does anyone have any good tips for the use of
> highlighters on the exam. The archives generally
> suggest coloring different protocols with different
> colors, but since almost everything is IP now that
> information seems dated.
>
> I was thinking about using different colors to
> represent different kinds of links. IE. IBGP would be
> a different color than EBGP, OSPF area 0 links would
> have their own color etc.
>
> Bill C.
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> http://mailplus.yahoo.com
> .
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:01 GMT-3