From: Louis Young (tonyblair@etang.com)
Date: Fri Jan 17 2003 - 04:53:54 GMT-3
Error Message
%IP_SNMP-3-SOCKET: can't open UDP socket
Explanation The SNMP server was unable to open a port for receiving or transmitting SNMP requests. This error usually occurs when the SNMP server is started using the snmp-server community configuration command on a router or communication server with an interface that has no IP address configured. Another possible cause is insufficient memory.
Recommended Action Configure at least one interface with an IP address or specify the no snmp-server command to remove the SNMP server process. Call your Cisco technical support representative if problems persist or if it becomes necessary to add memory.
Regards,
Louis
----- Original Message -----
From: "Paul Young" <tsungdapaulyoung@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Friday, January 17, 2003 3:36 PM
Subject: Cat3550 generates error msg when snmp-server command used
> Hi group:
>
> Just starting to play with the Cat3550 switch and
> found whenever I execute a snmp-server command the
> following error message keep on showing up:
>
> IP_SNMP-3-SOCKET: can't open UDP socket
> Unable to open socket on port 161
>
> I'm running EMI image of 12.1(11)EA
>
> Any ideas how to stop this error msg from showing up?
> Does anything need to be corrected?
> Thanks.
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> http://mailplus.yahoo.com
> .
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:52 GMT-3