From: Hunt Lee (huntl@webcentral.com.au)
Date: Fri Jan 17 2003 - 02:20:53 GMT-3
Nathan,
Can you please show us some outputs for "show ip mroute"?
Hunt
-----Original Message-----
From: Nathan Chessin [mailto:nchessin@cisco.com]
Sent: Friday, 17 January 2003 2:28 PM
To: ccielab@groupstudy.com
Subject: Multicast ?
Hi All,
I am trying a simple dense-mode config that looks like the following.
R1----eth------R2----serial------R3
The "ip igmp join-group 224.1.1.1" is configured on R1 interface, and I can
ping from R2 to the address 224.1.1.1, but not R3 to 224.1.1.1 Does anyone
see a reason why?
Also, if I add "ip igmp join-group 224.1.1.1" to the R2 serial interface,
then I can ping 224.1.1.1 from R3. Encaps over the serial is HDLC
R1
ip multicast-routing
int e0
ip add 111.1.1.1 255.255.255.0
ip pim dense-mode
R2
ip multicast-routing
int e0
ip add 111.1.1.2 255.255.255.0
ip pim dense-mode
int s0
ip add 10.1.1.2 255.255.255.0
clock rate 64000
ip pim dense-mode
R3
ip multicast-routing
int s0
ip add 10.1.1.3 255.255.255.0
ip pim dense-mode
Thanks,
Nate
.
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:52 GMT-3