From: Richard Young (cc_young@pacbell.net)
Date: Fri Jan 17 2003 - 00:52:44 GMT-3
I tried this and it works well.
It is awsome!!
Thanks,
cc_young
TekMail wrote:
> Try this:
>
> ip alias 10.0.1.1 2001
> ip alias 10.0.1.2 2002
> ip alias 10.0.1.3 2003
>
> It creates a static ARP entry for the listed ip address and links it to the
> specified line number... just like the host statements for reverse telnet.
>
> Ed
>
> ----- Original Message -----
> From: "Richard Young" <cc_young@pacbell.net>
> To: <ccielab@groupstudy.com>
> Sent: Thursday, January 16, 2003 4:49 PM
> Subject: Want to map a reverse telnet to an IP address
>
> > Hi,
> > I have a 2611 async router configured with reverse telnet to several hosts
> and
> > the reverse telnet to each host works correctly. Here is the config.
> > --------------------------------------------------------
> > interface Loopback0
> > ip address 1.1.1.1 255.255.255.255
> > !
> > ip host server1 2001 1.1.1.1
> > ip host server2 2002 1.1.1.1
> > ip host server3 2003 1.1.1.1
> > ip host server4 2004 1.1.1.1
> > ip host server5 2005 1.1.1.1
> > ip host server6 2006 1.1.1.1
> > ip host server7 2007 1.1.1.1
> > ip host server8 2008 1.1.1.1
> > ip host server9 2009 1.1.1.1
> > !
> > line 1 8
> > no exec
> > transport input all
> > --------------------------------------------------------------------------
> ----------
> >
> > I would like to have these devices available from somewhere else on my
> > intranet
> > by assigning a single ip address to each device.
> >
> > I do not want to have to type "telnet 1.1.1.1 2001" to access the server1
> > for instance.
> > I was thinking I could create several loopbacks, one for each device for
> > instance:
> >
> > int loop 1
> > ip address 1.1.1.1 255.255.255.255
> > int loop 2
> > ip address 1.1.1.2 255.255.255.255
> > int loop 3
> > ip address 1.1.1.3 255.255.255.255
> > as an example.
> >
> > I would then advertise the 1.1.1.0 network to my intranet.
> > At that point from anywhere on the intranet, I could telnet 1.1.1.1 ro get
> to
> > server1
> > or
> > telnet 1.1.1.2 to get to server2 etc.
> >
> > This way I could add these to my local dns and telnet server1 to access
> > server1 from anywhere on the intranet.
> >
> > If I could add port numbers to a dns entry something like
> >
> > server1 1.1.1.1 2001
> > server2 1.1.1.2 2002
> > server3 1.1.1.3 2003
> >
> > This might work.
> >
> > Anybody with any ideas?
> >
> > Thanks in advance
> > Richard
> > .
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:52 GMT-3