From: MMoniz (ccie2002@tampabay.rr.com)
Date: Thu Jan 16 2003 - 22:09:32 GMT-3
I have had a few questions on my quest for this number. I have emailed to
ccie@cisco.com and have always received
straight answers to my questions about what is or is not in the lab.
That is your best bet.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Chris Home
Sent: Thursday, January 16, 2003 7:22 PM
To: Jason Sinclair; 'Rick'; ccielab@groupstudy.com
Subject: Re: Need Help building the real CCIE PODS
You might try the director of the CCIE program. He assisted a company I used
to work for in getting them a parts list for their lab.
----- Original Message -----
From: "Jason Sinclair" <sinclairj@powertel.com.au>
To: "'Rick'" <ccie_2003@hotmail.com>; <ccielab@groupstudy.com>
Sent: Thursday, January 16, 2003 5:31 PM
Subject: RE: Need Help building the real CCIE PODS
> Rick,
>
> This is not a beat up, however I feel that this is indeed NDA related.
> Remember any information NOT covered on the Cisco site and blueprint is
> considered confidential and hence would be covered via the NDA. Also, it
is
> my belief that the interface types and details would change from exam to
> exam? Again, this is not a dig, however I think you may not get much
detail
> on this. Your best bet would be to contact Cisco and ask what information
> they will release regarding this.
>
> Regards,
>
> Jason Sinclair CCIE #9100
> Manager, Network Control Centre
> POWERTEL
> 55 Clarence Street,
> SYDNEY NSW 2000
> AUSTRALIA
> office: + 61 2 8264 3820
> mobile: + 61 416 105 858
> email: sinclairj@powertel.com.au
>
> -----Original Message-----
> From: Rick [mailto:ccie_2003@hotmail.com]
> Sent: Friday, 17 January 2003 08:45
> To: ccielab@groupstudy.com
> Subject: Need Help building the real CCIE PODS
>
> All,
>
> I'm in the process of building the real CCIE POD for a company. Does
anyone
> have the specs on the exact boxes and interfaces? I know on the blue print
> it
> states 3600s, 2600s, 2 3550s, with a shared LS1010 and ISDN simulator. I'm
> looking for what type of interfaces and the per box breakout. This would
not
> be NDA material as I'm not asking for physical topology.
>
> example:
> 6 2620s with 2 wic 1Ts
> 2 3550s 24/port EMI
> 1 LS1010
>
> Thanks,
> Rick
> .
> **********************************************************************
> PowerTel Limited, winners of
> Best Corporate/Wholesale Broadband Initiative, Australian Telecom Awards
2002
> Broadband Wholesale Carrier of the year, CommsWorld Telecomms Awards 2001
> Best Emerging Telco, Australian Telecom Awards 2001
>
> **********************************************************************
> This email (including all attachments) is intended solely for the named
> addressee. It is confidential and may contain commercially sensitive
> information. If you receive it in error, please let us know by reply
email,
> delete it from your system and destroy any copies.
>
> This email is also subject to copyright. No part of it should be
reproduced,
> adapted or transmitted without the prior written consent of the copyright
owner.
>
> Emails may be interfered with, may contain computer viruses or other
defects
> and may not be successfully replicated on other systems. We give no
> warranties in relation to these matters. If you have any doubts about
> the authenticity of an email purportedly sent by us, please contact us
> immediately.
>
> **********************************************************************
> .
.
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:51 GMT-3