From: Barry Rowland (reachbarry@bigfoot.com)
Date: Thu Jan 16 2003 - 15:00:40 GMT-3
Sorry for the OT, but I thought maybe someone else out there has run into
this.
I'm using 2 ubr924's, I picked up pretty cheap, to do Voip scenario's on my
home rack. The problem is
after using them for a day and everything worked fine, exept as noted below, I
come in the next morning and cannot get a dial tone for any of the ports on
either unit.
Debug indicates the ports do sense the off hook condition and come up with a
"tone", but you can't hear it on any of the phones. I have tried reboots, both
warm and power cycle, but still no dial tone. This is really strange, as the
same configs where working fine yesterday. I did have this problem with one of
the routers yesterday morning but after a few power cycles the ports came up!
I will be loading
a 12.2 Enterprise image this evening to see if this helps.
Thanks for any ideas!
Barry
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:51 GMT-3