From: Jonathan V Hays (jhays@jtan.com)
Date: Thu Jan 16 2003 - 11:43:30 GMT-3
Hi,
I have tested your menu on a 2501 running 12.1(5)T9 - it works fine. Try
loading a different IOS.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Robert Yee
Sent: Tuesday, January 14, 2003 2:10 PM
To: ccielab@groupstudy.com
Subject: Menu command will not pause
Hi all,
I'm trying out the menu command and it seems to work ok, except, when I
issue a command, the result flashes then retrurnd to the menu. I have
put pause with every command, am I missing something?
Here is the config I'm playing with.
menu New_title title ^C
Welcome to the Bluespud Terminal
Type a number to select an option.
Type 9 to exit the menu.
^C
menu New_title text 1 Display BGP Table
menu New_title command 1 show ip bgp
menu New_title options 1 pause
menu New_title text 2 Clear Routing Table
menu New_title command 2 clear ip route *
menu New_title options 2 pause
menu New_title text 3 Display 'Show Tech'
menu New_title command 3 show tech
menu New_title options 3 pause
menu New_title text 9 Exit the system
menu New_title command 9 menu-exit
menu New_title clear-screen
thanks,
Robert
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:51 GMT-3