From: steve r (route2hell@hotmail.com)
Date: Wed Jan 15 2003 - 20:54:46 GMT-3
Has anyone got the 675 to work on adsl with SBC network,
I have no luck with this device I found some references on cisco site but
nothing helped me so far
Stephen R
----- Original Message -----
From: "syv" <syv@911networks.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, January 15, 2003 6:08 PM
Subject: Assigning the correct interface to RIP
> Hi,
>
> The layout is simple:
>
> OSPF ---- s1 R3 fa0 ---- RIPv2 --- R6
>
> How to make so that RIP thinks that s1 is in OSPF and not in
> RIP?
>
> If I do a distribute-list in RIP, it will stop the OSPF
> route redistribution into RIP.
>
> R3S1: 131.108.5.3/24
> R3fa0: 131.108.1.3/24
>
> Passive-interface prevents sending routes out of that
> interface, but RIP still considers s1 as RIP since it
> matches the classful network statement.
>
> R6 thinks that R3S1 is sourced by RIP and not by OSPF
>
> R6 Debug IP RIP shows that 131.108.5.0 is from RIP.
>
> Jan 15 14:57:28.798 PST: RIP: build flash update entries
> Jan 15 14:57:28.798 PST: 131.108.1.0/24 via 0.0.0.0, metric 1, tag 0
> Jan 15 14:57:28.798 PST: 131.108.2.0/24 via 131.108.1.6, metric 2, tag
0
> Jan 15 14:57:28.798 PST: 131.108.3.0/24 via 131.108.1.7, metric 2, tag
0
> Jan 15 14:57:28.798 PST: 131.108.4.0/24 via 0.0.0.0, metric 6, tag 0
> Jan 15 14:57:28.802 PST: 131.108.5.0/24 via 0.0.0.0, metric 1, tag 0
>
>
>
> Here is the R3 configuration
>
> interface Serial1
> ip address 131.108.5.3 255.255.255.0
> !
> interface FastEthernet0
> ip address 131.108.1.3 255.255.255.0
> !
> router ospf 10
> router-id 10.254.3.3
> redistribute rip metric-type 1 subnets tag 123
> network 131.108.5.0 0.0.0.255 area 1
> default-metric 121
> !
> router rip
> version 2
> redistribute ospf 10
> passive-interface default
> no passive-interface FastEthernet0
> network 131.108.0.0
> default-metric 6
> no auto-summary
> !
>
>
> Sh ip protocols
> =-=-=-=-=-=-=-=-
> Routing Protocol is "rip"
> Sending updates every 30 seconds, next due in 16 seconds
> Invalid after 180 seconds, hold down 180, flushed after 240
> Outgoing update filter list for all interfaces is not set
> Incoming update filter list for all interfaces is not set
> Default redistribution metric is 6
> Redistributing: rip, ospf 10 (internal, external 1 & 2, nssa-external 1
& 2)
>
> Default version control: send version 2, receive version 2
> Interface Send Recv Triggered RIP Key-chain
> FastEthernet0 2 2
> Automatic network summarization is not in effect
> Maximum path: 4
> Routing for Networks:
> 131.108.0.0
> Passive Interface(s):
> Serial0
> Serial1
> Serial2
> Routing Information Sources:
> Gateway Distance Last Update
> 131.108.1.6 120 00:00:10
> 131.108.1.7 120 00:00:02
> Distance: (default is 120)
>
>
>
> --
> Thanks
> syv@911networks.com
> .
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:50 GMT-3