From: Janto Cin (jantocin@datacomm.co.id)
Date: Wed Jan 15 2003 - 01:54:56 GMT-3
Yeah your're right Lee, I already tried it on my lab and it didn't
required the mapping.
Just still confused is it a CLIP or not ? (beside in CLIP we already
know the PVC).
Janto
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Hunt Lee
Sent: Wednesday, January 15, 2003 11:41 AM
To: 'Janto Cin'
Cc: 'ccielab@groupstudy.com'
Subject: RE: Help Help!!! ATM question
Hi Janto,
From Cary's sample configs, it doesn't look like one is required to map
L3 address to VCD manually.
Please correct me if I'm wrong.
Hunt
-----Original Message-----
From: Janto Cin [mailto:jantocin@datacomm.co.id]
Sent: Wednesday, 15 January 2003 1:33 PM
To: 'Joe Martin'; 'CCIE GroupStudy'
Subject: RE: Help Help!!! ATM question
Hi Joe,
If we configure a PVC using ilmi-pvc-discovery do we have to map L3
address to VCD manually?
TIA,
Janto
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Joe Martin
Sent: Wednesday, January 15, 2003 1:07 AM
To: CCIE GroupStudy
Subject: RE: Help Help!!! ATM question
Anyone,
Can you verify or correct the following statements? I think this is how
it works with ATM (without CLIP). Please correct me if I am wrong.
If configuring a PVC I must map L3 address to VCD.
If configuring an SVC with ILMI, I must specify local ESI and map L3
address to remote nsap address.
If configuring an SVC without ILMI, I must specify local nsap address
and map L3 address to remote nsap address.
TIA,
Joe Martin
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Fabrice Bobes
Sent: Tuesday, January 14, 2003 9:46 AM
To: 'Hunt Lee'
Cc: ccielab@groupstudy.com
Subject: RE: Help Help!!! ATM question
Lee,
No, you don't need it.
This SVC configuration will work without ilmi:
Int ATM 2/0
Ip add 10.10.10.2 255.255.255.0
Pvc 0/5 qsaal
Atm nsap-address 47.009181000000123456789012.1414.1414.1414.00
Svc svc-1 nsap 47.009181000000123456789012.1313.1313.1313.00
Protocol ip 10.10.10.1 br
Regards,
Fabrice
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Hunt Lee
Sent: Monday, January 13, 2003 10:47 PM
To: 'ccielab@groupstudy.com'
Subject: Help Help!!! ATM question
For ATM SVCs (assuming I'm not using Classical IP), is it true that
regardless of whether I am using the ESI address OR NSAP address, I
still need to enable ILMI by 'pvc 0/16 ilmi' command?
Regards,
Lee
-- WebCentral Pty Ltd Australia's #1 Internet Web Hosting Company Level 1, 96 Lytton Road. Network Operations - Systems Engineer PO Box 4169, East Brisbane. email: huntl@webcentral.com.au Queensland, Australia. phone: +61 7 3249 2553 . . . .
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:49 GMT-3