From: Janto Cin (jantocin@datacomm.co.id)
Date: Wed Jan 15 2003 - 01:29:30 GMT-3
Hi Brian,
Thank you for your help.
It work great after following the configuration at the URL.
Kind Regards,
Janto
-----Original Message-----
From: Brian McGahan [mailto:brian@cyscoexpert.com]
Sent: Wednesday, January 15, 2003 11:03 AM
To: 'Janto Cin'; 'Fabrice Bobes'; 'Hunt Lee'
Cc: ccielab@groupstudy.com
Subject: RE: Help Help!!! ATM question
Janto,
You can configure SVC's without using ilmi, however you need
static routes on the switch to tell it where your NSAP address is
located. See the following document for more information:
http://www.cisco.com/en/US/tech/tk39/tk47/technologies_configuration_exa
mple09186a0080094b3d.shtml
HTH
Brian McGahan, CCIE #8593
Director of Design and Implementation
brian@cyscoexpert.com
CyscoExpert Corporation
Internetwork Consulting & Training
Voice: 847.674.3392
Fax: 847.674.2625
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Janto Cin
> Sent: Tuesday, January 14, 2003 9:26 PM
> To: 'Fabrice Bobes'; 'Hunt Lee'
> Cc: ccielab@groupstudy.com
> Subject: RE: Help Help!!! ATM question
>
> Hi Fabrice,
>
> I've tried the configuration below on my lab and it didn't work. But
> it work by using ilmi w/ esi-address. Is it depend on how we configure
> the atm switch? Because it also happen when I configure SVC CLIP w/o
> ilmi. TIA.
>
> Janto
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Fabrice Bobes
> Sent: Tuesday, January 14, 2003 11:46 PM
> To: 'Hunt Lee'
> Cc: ccielab@groupstudy.com
> Subject: RE: Help Help!!! ATM question
>
>
> Lee,
>
> No, you don't need it.
> This SVC configuration will work without ilmi:
>
> Int ATM 2/0
> Ip add 10.10.10.2 255.255.255.0
> Pvc 0/5 qsaal
> Atm nsap-address 47.009181000000123456789012.1414.1414.1414.00
> Svc svc-1 nsap 47.009181000000123456789012.1313.1313.1313.00
> Protocol ip 10.10.10.1 br
>
> Regards,
>
> Fabrice
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Hunt Lee
> Sent: Monday, January 13, 2003 10:47 PM
> To: 'ccielab@groupstudy.com'
> Subject: Help Help!!! ATM question
>
> For ATM SVCs (assuming I'm not using Classical IP), is it true that
> regardless of whether I am using the ESI address OR NSAP address, I
> still need to enable ILMI by 'pvc 0/16 ilmi' command?
>
> Regards,
> Lee
>
> --
> WebCentral Pty Ltd Australia's #1 Internet Web Hosting
Company
> Level 1, 96 Lytton Road. Network Operations - Systems
Engineer
> PO Box 4169, East Brisbane. email:
huntl@webcentral.com.au
> Queensland, Australia. phone: +61 7 3249 2553
> .
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:49 GMT-3