From: Stong, Ian C [GMG] (Ian.C.Stong@mail.sprint.com)
Date: Mon Jan 13 2003 - 18:03:54 GMT-3
As you mentioned this has been discussed quite a bit recently. Check the
archives and if you don't find anything let me know and I'll send you some
posts from my archives :)
Thanks,
Ian
www.ccie4u.com
-----Original Message-----
From: Rick [mailto:ccie_2003@hotmail.com]
Sent: Monday, January 13, 2003 3:34 PM
To: ccielab@groupstudy.com
Subject: STP root question
When nailing down STP bridge priority Cisco says 1 is the lowest.. I have
seen
somewhere on this board where 0 was used... Is 0 the lowest?Can someone
confirm this?
Thanks,
Rick
.
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:48 GMT-3