From: Hunt Lee (ciscoforme3@yahoo.com.au)
Date: Sun Jan 12 2003 - 09:22:07 GMT-3
Hi Group,
In the Skynet Lab, the requirement is that R6 should be able to ping the EIGRP
network without adding any static route. The solution states to use "ip
default-network", but I was thinking whether there are other ways to do this?
Following is what I tried but didn't work...
I create a secondary address on both R3 & R6 with a complete different classful
netowrk, like 35.0.0.1 /8 & .2/8. The 151.100.0.0/15 still doesn't come up at R6, I
thought if the interface is not on the same classful network, an RIP update would be
created by "auto-summary"
I have also read on Groupstudy & CCO stating that if the RIP entry is on the same
classful network and the same subnet mask, it will becomes part of RIP update also.
So the EIGRP route is 151.100.0.0/15, what should I make this to work?
Can anybody explain !
Thanx and regds...Hunt
http://movies.yahoo.com.au - Yahoo! Movies
- What's on at your local cinema?
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:47 GMT-3