From: Sage Vadi (sagevadi@yahoo.co.uk)
Date: Sat Jan 11 2003 - 03:07:12 GMT-3
John,
The reason why it doesn't show up because it is turned
on by default. If you insert a "no ip split-horizon
eigrp 100" you will see it crop up.
It says "the behavior of this command is enabled by
default".
Cheers,
Sage
--- "Cameron, John" <johcamer@cisco.com> wrote: > I
have two routers R1 and R2 both running eigrp 100.
> R1 is a p2p
> FR subinterface and R2 is a FR physical interface.
>
> When I issue "show ip int s0/0" on R2 I see that
> split horizon is disable
> as
> you would expect, but when I use the command:
>
> "ip split-horizon eigrp 100"
>
> there is no change in the configuration:
>
> interface Serial0/0
> ip address 10.20.1.2 255.255.0.0
> encapsulation frame-relay
> frame-relay map ip 10.20.1.1 201 broadcast
> no frame-relay inverse-arp
> frame-relay lmi-type cisco
>
>
> when I issue the command "ip split-horizon" this
> command works
>
> interface Serial0/0
> ip address 10.20.1.2 255.255.0.0
> encapsulation frame-relay
> ip split-horizon
> frame-relay map ip 10.20.1.1 201 broadcast
> no frame-relay inverse-arp
> frame-relay lmi-type cisco
>
> why isn't the "ip split-horizon eigrp 100" showing
> up? what am I missing?
>
> Thanks,
> JDC
> .
>
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:47 GMT-3