From: Gene_Thorne@doh.state.fl.us
Date: Fri Jan 10 2003 - 17:12:39 GMT-3
Well I guess mine is too big (he said modestly). :-) Thanks to all who
replied.
-gt
-----Original Message-----
From: Scott Morris [mailto:swm@emanon.com]
Sent: Friday, January 10, 2003 10:39 AM
To: 'Frank Jimenez'; Gene_Thorne@doh.state.fl.us; ccielab@groupstudy.com
Subject: RE: Xyplex question
I don't remember there being a separate feature for the memory card, but
you do need a small one. I believe 4 meg is the max, depending on which
model of Xyplex you have, but 2 meg is their default size.
Make sure to do:
DEFINE SERVER MANAGER LOAD ENABLE
And then:
INITIALIZE DELAY 1
To reboot. This will get the card options available. Then format your
card with:
FORMAT CARD OPTION (#)
And then copy the appropriate files in there.
Enjoy!
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Frank Jimenez
Sent: Friday, January 10, 2003 10:03 AM
To: Gene_Thorne@doh.state.fl.us; ccielab@groupstudy.com
Subject: RE: Xyplex question
I seem to remember that the Xyplex box only takes a 2MB Flash card -
maybe you've got the wrong size?
Can anyone else on the list confirm?
Frank Jimenez, CCIE #5738
franjime@cisco.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Gene_Thorne@doh.state.fl.us
Sent: Friday, January 10, 2003 7:28 AM
To: ccielab@groupstudy.com
Subject: Xyplex question
I have a Xyplex 1600 terminal server in my lab. Currently it is set up
to boot off a TFTP server which works fine. However, I'd like to add a
flash card (seems like a good application for an old card gathering dust
in my parts box) but when I try to format the card I get:
Xyplex>> set server format card
Xyplex -786- Memory Card Feature disabled
Xyplex>>
The server is freshly reset. I have looked in the archives and Xyplex
docs without success. Anyone know how to enable the memory card feature?
-Thanks gt . .
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:47 GMT-3