From: Hung, Sing-Yu (Sing-Yu.Hung@pccw.com)
Date: Fri Jan 10 2003 - 08:19:05 GMT-3
Dear,
I have IOS 12.1(5)T14 and I can't use MBGP, can anyone can?
r14#sho ver
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-JO3S56I-M), Version 12.1(5)T14, RELEASE
SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 24-Dec-02 17:14 by ccai
Image text-base: 0x60008950, data-base: 0x615FA000
ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
r14 uptime is 6 minutes
System returned to ROM by reload at 15:23:41 UTC Thu Dec 19 2002
System image file is "flash:c3640-jo3s56i-mz.121-5.T14.bin"
cisco 3640 (R4700) processor (revision 0x00) with 59392K/6144K bytes of
memory.
Processor board ID 21989707
R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
2 Ethernet/IEEE 802.3 interface(s)
1 FastEthernet/IEEE 802.3 interface(s)
3 Serial network interface(s)
1 ATM network interface(s)
2 Voice FXO interface(s)
2 Voice E & M interface(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
r14#conf t
Enter configuration commands, one per line. End with CNTL/Z.
r14(config)#router bgp 8548
r14(config-router)#neighbor 145.20.100.2 remote-as 8548 ?
<cr>
r14(config-router)#neighbor 145.20.100.2 remote-as 8548
Bradford Hung
Pacific Century CyberWorks
Tel: 288 33125
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:46 GMT-3