From: Jonathan V Hays (jhays@jtan.com)
Date: Thu Jan 09 2003 - 12:12:14 GMT-3
12.1(5)T12 is an Early Deployment release, and those releases can be
buggy. Try upgrading to a more stable (GD) release.
Jonathan
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
tan
Sent: Wednesday, January 08, 2003 5:43 AM
To: Ccielab (E-mail)
Subject: OT: 12.1(T) ROUTELIMITEXCEEDED error
I am getting errors consistently on a couple of my 2500s with
12.1(5)T12. I think it happened on 2600 too with same version IOS.
Anyone else see this?
ra(config)#int ser 0
ra(config-if)#ip address 10.1.5.1 255.255.252.0 ra(config-if)#no shut
00:09:55: %IPRT-3-ROUTELIMITEXCEEDED: IP routing table limit exceeded -
Default-IP-Routing-Table, 10.1.4.0/22
This is a fresh booted router with empty config. There is nothing in
route table at this point. In the above situation, I exited config mode
and re-entered. Second time no error message. Show ip int brief shows
the int configured, but still not in route table. Then a quick clear ip
route, shows up right away. I do this several times a day on different
routers, but all same IOS. Doesn't happen with 12.1(18) routers. .
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:46 GMT-3