From: Bob Sinclair (bsin@cox.net)
Date: Wed Jan 08 2003 - 21:05:08 GMT-3
Paul,
The vlan and VTP data are stored in a file called vlan.dat. If you do a
"dir" command you will see it. To clear, do "erase vlan.dat" in addition
to the erase start. This is also true of the other 2900 and 3500 models.
What makes the 3550 different is that the vlan and VTP config is also stored
in config.text.
-Bob
----- Original Message -----
From: "Paul Young" <tsungdapaulyoung@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, January 08, 2003 6:38 PM
Subject: Cat3550 VTP & VLAN info stays after write erase?
> Hi group:
>
> Just starting to play with the Cat3550 switch and
> found VTP and VLAN settings does not get erase after
> write erase and reload!
> Is there a separate command that clears all the
> VTP and VLAN settings?
> Thanks.
>
> Regards,
> Paul Young.
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> http://mailplus.yahoo.com
> .
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:45 GMT-3