From: Evgeny Tantsura (ivgen@castel.nl)
Date: Wed Jan 08 2003 - 19:59:08 GMT-3
You may not use summary word at all,
thus not in aggregate-address .....summary-only.
How would you get only the summary and suppress the rest ????
> If the Summary word can't be used,
> try the "aggregate-address" option.
>
> http://www.cisco.com/en/US/tech/tk648/tk365/technologies_tech_note09186a0080094826.shtml
>
>
> Robert
>
>
>
> ------------------------------------------------
> On Wed, 8 Jan 2003 15:10:51 +0100 (CET), Evgeny Tantsura <ivgen@castel.nl> wrote:
>
> > AS1 | AS 2
> > R1-----\ |
> > R2-----R3|-----R4 BGP - 122.168.1.0 - 122.157.10.0
> > |
> > |
> >
> > R3 receives 10 /24 networs from R4
> >
> > R1 and R2 should receive only 1 summary route, not /16
> > Summary word can't be used.
> >
> > Routes on R3 can't be suppressed.
> >
> >
> > With kind regards/ met vriendelijke groeten,
> > ------------------------------------------------
> > E. Tantsura
> > Network Developer
> > Essent Kabelcom N.V.
> > Dr.van Deenweg 84
> > 8025BN Zwolle, The Netherlands
> > Tel: +31-(0)38-850-7642
> > Fax: +31-(0)38-850-7410
> > Mob: +31-(0)6-290-80458
> > ------------------------------------------------
> > .
With kind regards/ met vriendelijke groeten,
------------------------------------------------
E. Tantsura
Network Developer
Essent Kabelcom N.V.
Dr.van Deenweg 84
8025BN Zwolle, The Netherlands
Tel: +31-(0)38-850-7642
Fax: +31-(0)38-850-7410
Mob: +31-(0)6-290-80458
------------------------------------------------
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:45 GMT-3