From: Aidan Marks (amarks@cisco.com)
Date: Wed Jan 08 2003 - 08:49:30 GMT-3
you likely need the fix for CSCdr48853.
At 09:42 PM 8/01/2003, tan wrote:
>I am getting errors consistently on a couple of my 2500s with 12.1(5)T12. I
>think it happened on 2600 too with same version IOS. Anyone else see this?
>
>ra(config)#int ser 0
>ra(config-if)#ip address 10.1.5.1 255.255.252.0
>ra(config-if)#no shut
>00:09:55: %IPRT-3-ROUTELIMITEXCEEDED: IP routing table limit exceeded -
>Default-IP-Routing-Table, 10.1.4.0/22
>
>This is a fresh booted router with empty config. There is nothing in route
>table at this point. In the above situation, I exited config mode and
>re-entered. Second time no error message. Show ip int brief shows the int
>configured, but still not in route table. Then a quick clear ip route, shows
>up right away. I do this several times a day on different routers, but all
>same IOS. Doesn't happen with 12.1(18) routers.
>.
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:45 GMT-3