From: Matthew Poole (matthew.poole@blueyonder.co.uk)
Date: Wed Jan 08 2003 - 07:54:39 GMT-3
Debug's are only effective on process switched packets - possibly the reason
why.
To disable fast switching (default) the command is "no ip route-cache" or
similar, probably applied on the interface.
HTH
Mat.
----- Original Message -----
From: "tan" <tan@dia.janis.or.jp>
To: "Ccielab (E-mail)" <ccielab@groupstudy.com>
Sent: Wednesday, January 08, 2003 10:39 AM
Subject: OT: lack of output in debug ip icmp
> Is it normal that typical outgoing pings are not output to console under
> "debug ip icmp"? Only return pings and other icmp types are included, but
> not standard echo request. I have been bit a few times just assuming my
ping
> went out and was troubleshooting the return path, when it turned out it
> never left the router because unroutable. I have found only "debug ip pack
> det" will include outgoing ping? I know not much can be done about it, but
> anyone else find it odd or offer an explanation why?
> .
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:45 GMT-3