From: Boehmler, John (jboehmler@cisco.com)
Date: Tue Jan 07 2003 - 18:47:36 GMT-3
The old CSSs used a straight through ethernet cable with their proprietary DB9.
John
At 12:32 PM 1/7/2003 -0600, scook@forsythemca.com wrote:
>Take a look on the doc CD. All of the cable pinouts are listed there. I
>think the older CSS's came with their own console cable. The newer
>shipments not have a "patch cable" (I'm not sure what it's official name
>is) that you can connect your standard roll over cable to. I believe it
>now looks like: PC -- DB9 terminal adapter -- light blue roll over cable
>-- CSS patch cable (RJ45 female to RJ45 male) -- CSS I made one of these
>patch cables that I can attach to my roll over. Customers always seem to
>lose the Cisco patch cable. Good luck.
>.
John Boehmler
Cisco Systems
System Engineer - Delaware Valley Named
301 Lindenwood Dr., Suite 210
Malvern, PA 19355
Cell: 610.348.8774
Phone: 610.695.2943
Fax: 610.768.0708
mailto: jboehmler@cisco.com
http: www.cisco.com
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:44 GMT-3