From: Todd Carswell (acarswell@nc.rr.com)
Date: Tue Jan 07 2003 - 17:58:04 GMT-3
I'm suffering from brain flatulence today. I made a mistake. The "ip
summary-address" command will work on locally connected subnets.
Sorry about the goof!
Todd
Todd Carswell wrote:
> Ali,
>
> Do you have "auto-summary" disabled under the EIGRP routing process?
> If not, then the default behavior of EIGRP is to summarize locally
> connected subnets. Your loopback IP addresses may appear to be
> getting summarized by the "ip summary-address" command but the
> auto-summary feature may be doing it instead.
>
> Issue the command "no auto-summary" under the EIGRP process, clear
> your EIGRP neighbors and re-check your routing tables. Your loopbacks
> should not be getting summarized anymore. The "ip summary-address"
> command applies only to non-local networks.
> Later.
>
> Todd
>
>
>
> Ali Fahmi wrote:
>
>> Hi All, refer to Routing TCP IP Vol I Book By Jeff Doyle, pg 726 ,
>> 3rd paragraph, it says, " the eigrp summarization applies only to
>> routes being redistributed inte EIGRP process domain"
>>
>> I try in my lab as follow,
>>
>> router A --------------------------------Router B
>> Lo0:192.168.1.0
>> Lo1:192.168.2.0
>>
>> All router above are running EIGRP proc.ID 1
>> refer to Jeff Doyle Book, I can not summarize internal routes, but in
>> my lab, I can do it, anybody can explain?
>>
>> thx,
>> Ali
>> ===================================================================================
>>
>> Pendaftaran Domain Baru Hanya di PlasaCom
>> ===================================================================================
>>
>> .
>
> .
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:44 GMT-3