From: P729 (p729@cox.net)
Date: Tue Jan 07 2003 - 15:29:51 GMT-3
"...but I can't find anything similar in 12.1..."
Class-based marking was introduced in 12.1(2)T:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121
t/121t5/cbpmark2.htm
...and rolled into 12.2 mainline:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122relnt/xpr
n122/122newf.htm#26519
Regards,
Mas Kato
https://ecardfile.com/id/mkato
----- Original Message -----
From: "John Underhill" <stepnwlf@magma.ca>
To: <ccielab@groupstudy.com>
Sent: Tuesday, January 07, 2003 7:38 AM
Subject: DSCP
Okay, with the 3550, you can map cos/tos bits to dscp values with the mls
qos
map command, but I can't find anything similar in 12.1 on a 2500.. What I
need
to know is.. how do you make the mappings between precedence values and
dscp,
and/or, how do you mark incoming flows with the dscp values? With 12.2, you
can mark a flow with a class-map, but in 12.1 the option is not available,
only to map with a precedence, yet, you can still use the dscp marker in
wred
CBWFQ.. Any ideas?
.
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:44 GMT-3