From: Brian T. Albert (brian.albert@worldnet.att.net)
Date: Tue Jan 07 2003 - 15:16:10 GMT-3
Does this help you ?
interface BRI0
ip address 133.1.35.5 255.255.255.252
encapsulation ppp
ip ospf message-digest-key 1 md5 cisco
ip ospf demand-circuit
dialer map ip 133.1.35.6 name Rack01R3 broadcast 8358661
dialer map ip 133.1.35.6 name Rack01R3 broadcast 8358663
dialer load-threshold 128 either
dialer-group 1
isdn switch-type basic-ni
isdn spid1 0835866201 8358662
isdn spid2 0835866401 8358664
no peer neighbor-route **** note this
ppp authentication chap callin
ppp chap hostname R5
ppp multilink
!
router ospf 1
router-id 133.1.5.5
log-adjacency-changes
area 0 authentication message-digest
area 5 virtual-link 133.1.6.6 message-digest-key 1 md5 5 cisco
redistribute igrp 1 subnets route-map I2O ***** note this
network 133.1.5.0 0.0.0.255 area 0
network 133.1.35.4 0.0.0.3 area 0
network 133.1.56.0 0.0.0.255 area 5
network 133.1.235.0 0.0.0.255 area 0
neighbor 133.1.235.3
neighbor 133.1.235.2
!
router igrp 1
redistribute ospf 1 metric 1000 1 1 1 1
passive-interface default
no passive-interface Serial1
no passive-interface Serial1.45
network 133.1.0.0 ***** note this
access-list 1 deny 133.1.35.4 ***** note this
access-list 1 permit any ***** note this
dialer-list 1 protocol ip permit ***** note this
route-map I2O permit 10 ***** note this
match ip address 1 ***** note this
Brian T. Albert
CCIE #9682
brian.albert@worldnet.att.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Peng Zheng
Sent: Tuesday, January 07, 2003 10:48 AM
To: ccielab@groupstudy.com
Subject: Re: no host route for OSPF on PPP link
I asked this question two times, but no reply is
received. Does anyone duplicate the reason 4 under
http://www.cisco.com/warp/public/104/dcprob.pdf?
If so, could send me your configs?
Thanks.
--- Peng Zheng <zpnist@yahoo.com> wrote:
> Hi, I config opsf demand-circuit between R5 and R6,
> they are connected by ISDN with ppp. IP is:
> 131.108.1.0/24
>
> On R5, 131.108.3.1 is configured on ethernet 0, and
> rip is runing on 131.108.0.0, and under ospf od R5,
>
> redistribue rip subnet
>
> But I can not see host route in R5 and R6's ospf
> database as link:
>
> http://www.cisco.com/warp/public/104/dcprob.pdf
>
> Does anyone know what's the reason?
>
> Thanks for help.
>
> Best Wishes,
> Peng Zheng
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up
> now.
> http://mailplus.yahoo.com
> .
>
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:44 GMT-3