From: Desmond (cciestudy@sympatico.ca)
Date: Mon Jan 06 2003 - 21:21:36 GMT-3
FST is only for both ends on Token-ring.
I think only TCP and DLSW lite will be tested in the Lab.
Desmond
----- Original Message -----
From: "Mahmud, Yasser" <YMahmud@Solutions.UK.ATT.com>
To: "'Aidan Marks'" <amarks@cisco.com>; "Sage Vadi" <sagevadi@yahoo.co.uk>
Cc: "Evgeny Tantsura" <ivgen@castel.nl>; <ccielab@groupstudy.com>
Sent: Monday, January 06, 2003 4:25 PM
Subject: RE: DLSW+ encapsulation
> Hi,
> As anyone got FST to work over Ethernet i/f's. In the past I've when I've
> tried, the FST peer came up but the ethernet workstations couldn't get a
> netbios cct up. By changing the peering to TCP
> the workstations were able to get a netbios cct up.
>
> Yasser
>
>
> > -----Original Message-----
> > From: Aidan Marks [SMTP:amarks@cisco.com]
> > Sent: Monday, January 06, 2003 11:30 AM
> > To: Sage Vadi
> > Cc: Evgeny Tantsura; ccielab@groupstudy.com
> > Subject: Re: DLSW+ encapsulation
> >
> > DLSw+ FST is supported over ethernet.
> >
> > btw, IP routing is required for FST to work.
> >
> > Aidan
> >
> > At 09:19 PM 6/01/2003, Sage Vadi wrote:
> >
> > >According to the DLSW+ Support Matrix -
> > >
> > >1.) FST works with Ethernet, Frame, ATM and TokenCrap
> > >;)
> > >
> > >2.) Direct Encap supports Ethernet & TokenCrap
> > >
> > >3.) TCP seems to support everything.
> > >
> > >IMHO - you don't have to worry about TokenCrap anymore
> > >for CCIE lab.
> > >
> > >If you need this for work, I'd recommend you open a
> > >TAC case so Cisco can give you an official answer. But
> > >to me it seems quite clear in the DLSW+ Support
> > >Matrix.
> > >
> > >This other document, where is it? You've only quoted
> > >not shown me the URL.
> > >
> > >Cheers,
> > >Sage
> > >
> > >
> > >
> > >
> > > --- Evgeny Tantsura <ivgen@castel.nl> wrote: > Sage,
> > > >
> > > > Neither do I :)I've seen this Matrix before
> > > > But...
> > > >
> > > > Another cisco dociment:
> > > >
> > > > FST, however, provides neither reliable delivery of
> > > > frames nor local
> > > > acknowledgment. All keepalive
> > > > frames flow end to end. FST is supported only when
> > > > the end systems reside
> > > > on Token Ring.
> > > >
> > > > Direct encapsulation provides neither reliable
> > > > delivery of frames nor
> > > > local acknowledgment. All
> > > > keepalive frames flow end to end. Direct
> > > > encapsulation is supported only
> > > > when the end systems
> > > > reside on Token Ring. Direct encapsulation does not
> > > > provide any rerouting.
> > > >
> > > > + Solie
> > > >
> > > > ???????
> > > >
> > > >
> > > >
> > > > > Evgeny,
> > > > >
> > > > > IMHO - don't see why FST should care what the end
> > > > > system is. FST is a function of the way the router
> > > > > process DLSW flows - it fast switches it, and does
> > > > not
> > > > > use TCP mechanism.
> > > > >
> > > > > For a fulld detailed answer, check the below URL,
> > > > it
> > > > > is fantastic!!! And will answer all of your
> > > > questions.
> > > > >
> > > > > DLSw+ Support Matrix on CCO?
> > > > >
> > > > >
> > > >
> >
>http://www.cisco.com/en/US/customer/products/sw/iworksw/ps2474/prod_techn
> > ical_reference09186a008011a67f.html
> > > > >
> > > > > Cheers,
> > > > > Sage
> > > > >
> > > > >
> > > > >
> > > > > --- Evgeny Tantsura <ivgen@castel.nl> wrote: >
> > > > Hi,
> > > > > >
> > > > > > Solie p898 sais that
> > > > > > FST and Direct encapsulation can be used only
> > > > > > when the end systems reside on Token Ring.
> > > > > >
> > > > > > I can't find any confirmation.
> > > > > >
> > > > > > With kind regards/ met vriendelijke groeten,
> > > > > > ------------------------------------------------
> > > > > > E. Tantsura
> > > > > > Network Developer
> > > > > > Essent Kabelcom N.V.
> > > > > > Dr.van Deenweg 84
> > > > > > 8025BN Zwolle, The Netherlands
> > > > > > Tel: +31-(0)38-850-7642
> > > > > > Fax: +31-(0)38-850-7410
> > > > > > Mob: +31-(0)6-290-80458
> > > > > > ------------------------------------------------
> > > > > > .
> > > > > >
> > > > >
> > > >
> > >__________________________________________________________________
> > > > > > To unsubscribe from the CCIELAB list, send a
> > > > message
> > > > > > to
> > > > > > majordomo@groupstudy.com with the body
> > > > containing:
> > > > > > unsubscribe ccielab
> > > > >
> > > > > __________________________________________________
> > > > > Do You Yahoo!?
> > > > > Everything you'll ever need on one web page
> > > > > from News and Sport to Email and Music Charts
> > > > > http://uk.my.yahoo.com
> > > > >
> > > >
> > > > With kind regards/ met vriendelijke groeten,
> > > > ------------------------------------------------
> > > > E. Tantsura
> > > > Network Developer
> > > > Essent Kabelcom N.V.
> > > > Dr.van Deenweg 84
> > > > 8025BN Zwolle, The Netherlands
> > > > Tel: +31-(0)38-850-7642
> > > > Fax: +31-(0)38-850-7410
> > > > Mob: +31-(0)6-290-80458
> > > > ------------------------------------------------
> > > >
> > > >
> > > >
> > >
> > >__________________________________________________
> > >Do You Yahoo!?
> > >Everything you'll ever need on one web page
> > >from News and Sport to Email and Music Charts
> > >http://uk.my.yahoo.com
> > >.
> .
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:43 GMT-3