From: Shahid Shafi (sshafi@qualcomm.com)
Date: Mon Jan 06 2003 - 07:59:19 GMT-3
Hi Vijay,
Area 0 and VL can have different auth. The support is available since 12.x
code.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Vijay S Jayaraman
Sent: Monday, January 06, 2003 2:35 AM
To: Evgeny Tantsura
Cc: ccielab@groupstudy.com; love cisco; nobody@groupstudy.com
Subject: Virtual link authentication RE: Was DLSW+ encapsulation
Hi,
The virtual link authentication does not depend on the area 1
authentication i.e transit area authentication.....
Here since area 0 does not authenticate, the virtual link will not have
authentication configured.....at least thats my understanding...
So you could use different authentication for area 1 and area
0......However I am not too sure if the authentication type for the area 0
and virtual link could be different....
Could some one shed light on this......
Regards,
Vijay.
Evgeny Tantsura
<ivgen@castel.nl> To: love cisco
<love_cisco@hotmail.com>
Sent by: cc:
<ccielab@groupstudy.com>
nobody@groupstudy Subject: RE: DLSW+
encapsulation
.com
01/06/2003 03:32
PM
Please respond to
Evgeny Tantsura
router config
area <area #> authentication - clear text
area <area #> authentication message-digest - md5
interface config
ip ospf authentication-key <password>
> Hi, can somebody help me on this?
>
> area1
> (area 0) R4 <=====================> R11 (area 2)
> OSPF authentication
>
> The link between R4 and R11 is in OSPF area1. area1 also is virtual-link
> for area2. If I put OSPF authentication in area1. Then I have to enable
> OSPF authentication for the virtual-link. Further, I have to put area 0
in
> OSPF authentication.
> My question is how to use different authentication key and methord for
> those three authentication?
> like: MD5 and key1 for area 1. clear text and key2 for virtual-link. MD5
> with key2 for area 0.
>
> _________________________________________________________________
> OmSCJ@=gIOWn4s5D5gWSSJ<~O5M3!* MSN Hotmail!# http://www.hotmail.com
> .
With kind regards/ met vriendelijke groeten,
------------------------------------------------
E. Tantsura
Network Developer
Essent Kabelcom N.V.
Dr.van Deenweg 84
8025BN Zwolle, The Netherlands
Tel: +31-(0)38-850-7642
Fax: +31-(0)38-850-7410
Mob: +31-(0)6-290-80458
------------------------------------------------
.
.
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:43 GMT-3