From: enginedrive2002 (enginedrive2002@yahoo.ca)
Date: Sun Jan 05 2003 - 16:50:24 GMT-3
For secondary address solution, without disable split horizon, I define the
"neighbor" and it works fine as well.
E.D.
----- Original Message -----
From: "Ccie candidate" <beacc1e@yahoo.com>
To: <ccielab@groupstudy.com>
Cc: <ccieingroup@hotmail.com>; <cchorao@xtra.co.nz>;
<j.kohlenz@itknetwork.com>; <cathydelagarza@yahoo.com>
Sent: January 5, 2003 2:28 PM
Subject: OSPF to RIP (resolved)
> Hi Guys,
> Thanks for all replied. I have understand the issue/s with the solution of
secondary address (on the same major net) on the RIP routers better now.
>
> R4-----OSPF---R6-----RIP-----R2 (without using static red on R6 or
static on R2)
> Solution #1(RIPv2) It works.
> Solution#2 (Secondary address) It works. - but only Split Horizon
Disabled
> and secondary address and primary address on the same major net
> Solution#3 (Tunneling works) It works.
> Solution#4 (Using a different OSPF Process)It works.
>
> See this link.
>
http://www.cisco.com/en/US/tech/tk648/tk365/technologies_tech_note09186a0080
093fdd.shtml
> (Thanks Richard)
> Kafkaf.
>
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now
> .
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:42 GMT-3