Re: EIGRP & Spilt horizon

From: Aidan Marks (amarks@cisco.com)
Date: Sat Jan 04 2003 - 20:53:38 GMT-3


A command (extension to show run looks to be the consensus) to show the
configured parameters and the defaults is in the pipeline.

Aidan

At 07:34 AM 5/01/2003, Naresh Chhetri wrote:

>Hello
>
>There is a command sh derived-config, but not sure whether it will show
>the IOS default commands also
>
>------------------------------------------------------------------------
>
>----Original Message Follows---- From: Evgeny Tantsura Reply-To: Evgeny
>Tantsura To: "Cameron, John" CC: "'ccielab@groupstudy.com'" Subject: Re:
>EIGRP & Spilt horizon Date: Sat, 4 Jan 2003 20:32:33 +0100 (CET) If you
>set something on it default value IOS wont show it in the config. > I
>have two routers R1 and R2 both running eigrp 100. R1 is a p2p > FR
>subinterface and R2 is a FR physical interface. > > When I issue "show ip
>int s0/0" on R2 I see that split horizon is disable > as > you would
>expect, but when I use the command: > > "ip split-horizon eigrp 100" > >
>there is no change in the configuration: > > interface Serial0/0 > ip
>address 10.20.1.2 255.255.0.0 > encapsulation frame-relay > frame-relay
>map ip 10.20.1.1 201 broadcast > no frame-relay inverse-arp > frame-relay
>lmi-type cisco > > > when I issue the command "ip split-horizon" this
>command works > > interface Serial0/0 > ip address 10.20.1.2 255.255.0.0
> > encapsulation frame-relay > ip split-horizon > frame-relay map ip
>10.20.1.1 201 broadcast > no frame-relay inverse-arp > frame-relay
>lmi-type cisco > > why isn't the "ip split-horizon eigrp 100" showing up?
>what am I missing? > > Thanks, > JDC > . With kind regards/ met
>vriendelijke groeten, ------------------------------------------------ E.
>Tantsura Network Developer Essent Kabelcom N.V. Dr.van Deenweg 84 8025BN
>Zwolle, The Netherlands Tel: +31-(0)38-850-7642 Fax: +31-(0)38-850-7410
>Mob: +31-(0)6-290-80458 ------------------------------------------------
>. __________________________________________________________________ To
>unsubscribe from the CCIELAB list, send a message to
>majordomo@groupstudy.com with the body containing: unsubscribe ccielab
>
>------------------------------------------------------------------------
>
>The new MSN 8: smart spam protection and 2 months FREE*.
>.
.



This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:41 GMT-3