From: Evgeny Tantsura (ivgen@castel.nl)
Date: Sat Jan 04 2003 - 16:32:33 GMT-3
If you set something on it default value IOS wont show it in the config.
> I have two routers R1 and R2 both running eigrp 100. R1 is a p2p
> FR subinterface and R2 is a FR physical interface.
>
> When I issue "show ip int s0/0" on R2 I see that split horizon is disable
> as
> you would expect, but when I use the command:
>
> "ip split-horizon eigrp 100"
>
> there is no change in the configuration:
>
> interface Serial0/0
> ip address 10.20.1.2 255.255.0.0
> encapsulation frame-relay
> frame-relay map ip 10.20.1.1 201 broadcast
> no frame-relay inverse-arp
> frame-relay lmi-type cisco
>
>
> when I issue the command "ip split-horizon" this command works
>
> interface Serial0/0
> ip address 10.20.1.2 255.255.0.0
> encapsulation frame-relay
> ip split-horizon
> frame-relay map ip 10.20.1.1 201 broadcast
> no frame-relay inverse-arp
> frame-relay lmi-type cisco
>
> why isn't the "ip split-horizon eigrp 100" showing up? what am I missing?
>
> Thanks,
> JDC
> .
With kind regards/ met vriendelijke groeten,
------------------------------------------------
E. Tantsura
Network Developer
Essent Kabelcom N.V.
Dr.van Deenweg 84
8025BN Zwolle, The Netherlands
Tel: +31-(0)38-850-7642
Fax: +31-(0)38-850-7410
Mob: +31-(0)6-290-80458
------------------------------------------------
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:41 GMT-3